Care Tips

Care tips

Maintenance Tips for Embroidered Products (Including Microfiber Leather/Gold Leaf) and Phone Charms

I. Maintenance of Embroidered Products with Microfiber Leather

Microfiber leather (ultra-fine fiber synthetic leather) is more wear-resistant than ordinary artificial leather, but it still requires targeted protection to prevent mutual damage between embroidery threads and the leather:

Cleaning: Control Moisture, Prevent Residues, and Care for Different Areas

Surface Dust: Use a soft-bristle brush (e.g., wool brush, makeup brush) to gently sweep along the direction of the embroidery threads. For dust in the texture gaps of microfiber leather, dip a small piece of dry cotton cloth and gently wipe the gaps—avoid hard rubbing, as this may deform the leather’s texture.

Stain Removal: For light stains (e.g., coffee stains, juice stains), use a slightly damp lint-free cotton cloth dipped in diluted neutral detergent (e.g., neutral laundry detergent, microfiber leather-specific detergent, mixed at a 1:10 ratio). First, test on an inconspicuous part of the product to ensure no fading, then clean the stains using a "dabbing and pressing" method: only wipe the stained spots on the embroidered area to prevent the detergent from seeping into the thread core; for the microfiber leather area, use a dry cotton cloth to absorb moisture immediately after wiping, to avoid residual moisture hardening the leather or staining the embroidery threads.

Taboos: Never clean with solvents such as alcohol or gasoline (they will dissolve the surface coating of microfiber leather, causing whitening and cracking). Do not use hard-bristle brushes or steel wool, as these will damage the fiber structure of microfiber leather and the embroidery stitches.

Usage and Storage: Prevent Damage and Maintain Shape

Avoid long-term pressure on the microfiber leather part (e.g., piling heavy objects on an embroidered bag for a long time). Pressure will cause irreversible indentations on the leather. If storage is needed, place a layer of soft cotton cloth on the microfiber leather surface before placing lightweight items.

Before long-term storage, thoroughly clean and dry the product, then wrap it individually in a breathable cotton bag (do not use airtight plastic bags, as microfiber leather needs slight ventilation to prevent mildew). Keep the storage environment dry (humidity 40%-60%), and place 1 pack of phosphorus-free desiccant (not in direct contact with the product) to prevent mildew on the microfiber leather and mold growth on the embroidery threads.

Avoid direct contact between microfiber leather and sharp objects (e.g., nails, scissors, metal jewelry). Although microfiber leather is wear-resistant, sharp objects can easily scratch the surface layer of the leather and further snag the embroidery threads, leading to pattern damage.

II. Maintenance of Gold Leaf Embroidered Products

Gold leaf is as thin as a cicada’s wing and easily loses its luster due to friction and oxidation. Maintenance should focus on "gentle contact and isolation":

Cleaning: Dust Removal Without Friction, No Water or Chemicals

Daily Dust Removal: Prioritize using an air duster (special for computer keyboard cleaning) and aim it at the gold leaf embroidery area from a distance (≥15cm). Use low-pressure air flow to blow away dust—avoid holding the air duster too close, as this may cause the edges of the gold leaf to curl. If no air duster is available, use a soft squirrel-hair brush to gently sweep away dust; the brush should only touch the dust, not the gold leaf surface.

Oil Stain Removal: If contaminated with hand sweat or cosmetic oils (e.g., foundation, lipstick), use a clean suede cloth to gently "dab" the oil stains (do not wipe—wiping will cause the gold leaf to fall off). Replace the cloth surface after each dab to prevent oil from spreading. After treatment, place the product in a ventilated area for 5-10 minutes to allow residual oil to evaporate.

Protection and Storage: Prevent Oxidation and Collision

Avoid long-term exposure of the gold leaf area to air or sunlight: Ultraviolet rays in sunlight will accelerate the oxidation and darkening of gold leaf, and high air humidity can cause "mold spots" on gold leaf. When not in use daily, store the product in an airtight box with a soft velvet lining, and place 1 pack of silver jewelry-specific anti-oxidation paper inside the box (keep it 5cm away from the gold leaf, no direct contact) to slow down oxidation.

Avoid contact with chemicals when wearing/using: Products containing alcohol or fragrances (e.g., perfume, hairspray, nail polish) can corrode the surface layer of gold leaf, causing local "white spots" or peeling. It is recommended to spray perfume and style your hair first, then put on the gold leaf embroidered jewelry.

No Stacking: Do not stack gold leaf embroidered products with other clothes or jewelry, as pressure and friction may cause large pieces of gold leaf to fall off. For small accessories (e.g., gold leaf embroidered pendants), wrap each individually in a soft velvet bag before placing them in a jewelry box.

III. Maintenance of Phone Charms (Including Lanyards and Accessories)

Phone charms are made of various materials (fabric, beaded strings, metal accessories, etc.), so care should be categorized by material, with a focus on protecting interfaces and high-wear parts:

Material-Specific Cleaning: Avoid Cross-Damage

Embroidered/Fabric Lanyards: Follow the same cleaning method as embroidered products. For light stains, gently wipe with a slightly damp cotton cloth dipped in neutral detergent. After drying, gently pull both ends of the lanyard to check if the stitches are loose (if loose, use matching thread for simple mending and reinforcement). If the lanyard has metal accessories, avoid getting them wet during cleaning to prevent rust from contaminating the fabric.

Beaded Strings/Resin Accessories: Wipe surface dust with a dry cotton cloth. Avoid contact with alcohol or nail polish remover (these will corrode resin and dissolve the coating on beaded strings). When storing, avoid pressure to prevent beading from cracking or accessories from deforming.

Metal Accessories (e.g., Clasps, Pendants): Wipe fingerprints and oxide layers on the surface with a dry cotton cloth. For slight rust on stainless steel accessories, gently polish with a small amount of toothpaste (only for silver-colored metal—avoid damaging gold-plated layers). After polishing, wipe clean with a dry cloth, and apply a small amount of petroleum jelly to the joints of the accessories regularly to prevent rust.

Daily Usage: Reduce Wear and Tear

Avoid "long-term stress + friction": When the phone is in your pocket or bag, a dangling phone charm will rub against clothes or other items, causing the lanyard to pill and accessories to scratch. It is recommended to remove the phone charm when not in use and store it separately from the phone in a soft cloth bag.

Prevent Water Exposure and High Temperatures: Keep the phone charm away from water during rainy days or handwashing—fabric lanyards are prone to mildew when wet, metal accessories rust, and beaded strings may slip and fall off. If it gets wet accidentally, dry it immediately and let it air out completely.

Regularly Check Interfaces: Inspect the connection between the phone charm and the phone’s lanyard hole, as well as the knots between accessories and the lanyard, once a week. If the lanyard is worn or knots are loose, reinforce them promptly with thread of the same material to prevent accessories from falling off or the phone from dropping.